+974 55641343 
info@orienttech.com.qa
+974 4451 2997
- Does the car tend to go left or right?
- Does the tire wear pattern seem strange?
- Do you think the steering is in the incorrect position when driving a straight line?
- Do you feel something is dragging your car, a reverse force?
If so, the car’s wheel alignment may be incorrect, and it is time to visit the Car Care Center in Qatar.
Alignment is an essential service and should be done when it is challenging to drive the car in a straight line, and when the vehicle starts to pull to one side. The term alignment means to seek the “Balance in Motion” of the car. This process is done by measuring and adjusting the angles in the best Car Service Center in Qatar that the vehicle’s wheels make concerning the vehicle’s floor and centerlines. If the parameters are very different from the factory ones, the suspension will react incorrectly to the driver’s control.
- The car goes off the road, goes sideways, which often leads to an accident,
- Increased wear of tires and suspension parts,
- Fuel consumption increases by 5-10%,
- Breakdown of the suspension and the rims.
Failure to trim could cause camber and toe-in outside the manufacturer’s specified limits, resulting in the vehicle’s tendency to pull to one side and premature wear of tire and suspension components. Tire wear leads to frequent tire replacement, while the tendency to pull to one side causes premature wear of suspension components. Make an online appointment to the nearest car service center, and get the best Wheel Alignment in Qatar. Be sure to perform a complete wheel trim according to the correct technical specifications after replacing the steering and suspension.
What are the risks?
Alignment issues occur when the steering system and suspension fail to function at the design angles. However, 4 Wheel Alignment in Qatar consists of adjusting the wheels’ tip in such a way as to bring it back to the values specified by the manufacturer.
- Stop the vehicle that tends to go to one side,
- Avoid wear of tires and steering and suspension components,
- Finally, ensure excellent road holding.
Balancing and alignment services are essential. Keep in mind that when you choose branded tires from the best Car Tyres Suppliers Doha Qatar, you will be buying premium products of high quality and with superior performance. However, taking the risk of uneven tire wear and premature service withdrawal is not worth the savings. Vehicles with wheel alignment or balance problems not only cause uneven tire wear but compromise travel comfort and safety. Depending on the severity of the case, other suspension components may suffer premature wear as well.
The wheels must be balanced in the Vehicle Service Center in Qatar each time the tires are disassembled and assembled, even if the tires remain the same. Remember that the balance is affected by the position of the tire on the wheel as well. Alignment is a sensitive parameter that quickly loses its reference. The alignment suffers from impacts and falls in holes. Note that problems or failures in components such as trays, tray bushings, shock absorbers, springs, axles, and other suspension components affect the vehicle’s alignment parameters, which can and will likely cause irregular tire wear, increasing the value of the loss.